Electrostatic Liquid Cleaner (ELC)
Applications
- Hydraulics
- Turbines
- Circulating oils
- Gear oils
- Compressors
- Transformers
- Heat transfer oils
- Any non-conducting fluid can be applied
Features
- Operates online
- Cleans to sub-micron levels
- Prevents deposits and cleans machine internals
- Reduces friction
- Reduces leaks
- Robust and reliable
Benefits
- No need for machine shutdown
- Helps prolong oil life
- Reduces component failure and maintains clearances
- Reduces wear and saves energy
- Saves oil and improves working environment
- Low maintenance costs
Where mechanical filtration is limited by the mesh pore size, Kleentek employs a unique electrostatic system to collect all types and sizes of contaminants. This provides increased machine reliability and unrivalled levels of fluid cleanliness.
Inside each Cleaning Chamber is a consumable Collector. Polar contaminants are attracted out of the oil by positive (+) and negative (-) electrodes and are then held in the Collector
can remove degradation deposits which if left inside the system, agglomerate and close clearances causing friction, wear and erratic machine performance.
 |
 |
 |
 |
 |
 |
Technical Specification
| Unit | Standard** | Cleaning capacity guide, litres hydraulic oils, ISO VG |
Pump flow |
Dimensions |
Weight |
Power cons |
Collectors PCs |
||||
32 |
46 |
68 |
100 |
l/min |
l x w x d (mm) |
kg |
w |
Type |
Set |
||
| ELC-R3PSP* | EU, IS |
800 |
560 |
380 |
210 |
1.2 |
311 x 361 x 531 |
20 |
140 |
CC-R3SP |
1 |
| ELC-R6PSP* | EU, IS |
1600 |
1120 |
760 |
420 |
1.2 |
359 x 386 x 531 |
23 |
140 |
CC-R3SP |
2 |
| ELC-R10SP | CE, IS |
5000 |
3400 |
2200 |
1200 |
2.2 |
675 x 350 x 915 |
70 |
150 |
CC-R10SP |
1 |
| ELC-R25SP | CE, IS |
12400 |
8600 |
5800 |
3200 |
3.7 |
675 x 350 x 950 |
72 |
150 |
CC-R25SP |
1 |
| ELC-R50SP | CE, IS |
24000 |
16600 |
11200 |
6000 |
9 |
710 x 530 x 1080 |
108 |
500 |
CC-R50SP |
1 |
| ELC-R100SP | CE, IS |
48000 |
33200 |
22400 |
12000 |
12 |
1070 x 515 x 1080 |
161 |
600 |
CC-R50SP |
2 |
Standard units are suitable for Mineral Oils, PAO, Di- and Polyol Esters and Vegetable Oils (for Phosphate Esters and Polyglycols special units are available)
Standard units available in 240V and 110V or 3 phase on request
Max temperature: 60°C (special units available for 85°C)
Max viscosity: 600 cSt
Max water content: 500ppm (=0.05%)
* This type of unit is also available without a pump
** The ELC units are manufactured in the following standards: IS = International Standard; CE = CE-marked for EU countries; EU = dedicated units (for European machine makers)
NOTE! For systems with servo valves the above values should be reduced by 20%
For oils with detergents/dispersants of metal or amine type the above valves should be reduced.
The life of the collector is normally 2000 hours. When initially cleaning a relatively high contaminated system, the life of the collector can be reduced to 500 - 1000 hours.
Contamination Checker Kit
Identifies all insoluble contaminants
The majority of contaminants in a used oil are <1µm.
Using membrane filter technology, you can identify ALL insoluble contaminants in your oil.
Checker Kit contents
Portable 50x microscope
Pencil type torch with batteries
Vacuum pump 240V
Glass filter holder with funnel & clamp
100 x 0.8µm micron filter papers 25mm dia
Filter paper mounts
Plastic plate for water identification
Plastic solvent bottle and nozzle
Plastic bottle for waste fluid
Graduated glass test tubes
Plastic sample bottles
Glass mixing rods
Tweezers
Heater panel
Carrying case
Click here for Kleentek Powerpoint Presentation