Micron Eagle  

Your Fluid Power Provider
Because we Care

Adapters

Reservoir Accessories » Breathers

Air Sentry breather adapters make installation of the Air Sentry breather easier.
Threaded Adapters: Suitable for use with Air Sentry breathers that have a 1" slip fit connection, are intended for reservoirs or gearboxes with a wall thickness sufficient for a tapped hole. Male and female NPT and male BSP thread versions are available.

Bayonet Adapters: Replaces a standard breather cap on a hydraulic reservoir. Simply remove the breather cap, place the bayonet adapter on the breather flange, and rotate one-quarter turn. No tank modification is required. Bayonet adapters fit Air Sentry breathers with a 1" slip-fit connection

Threaded Spin-on Adapters: Replace the standard spin-on particle filters made by many manufacturers. These adapters fit Air Sentry breathers with 1" slip-fit connections, are available in different sizes, and thread configurations. No tank modifications are required.

Flange Adapters: Are used with breathers having a 1" slip-fit connection, are used for
reservoirs where the tank wall is not thick enough to allow for tapping threads. With the Model A-101 adapter, mounting holes can be drilled in the high impact ABS molded flange to mate with any required hole pattern. The Model A-114 flange adapter has a standard ANSI 6-hole pattern pre-drilled for mounting.

Manufacturer: Air Sentry

Categories